Prior to utilizing the jigsaw glue for wood slabs, the wood is aged at least you month.
Many wood processing manufacturers often ask us why it is necessary to dry the wood for a time period before using the jigsaw stuff for wood jigsaw. If the full time is insufficient, the goods following the woodworking rubber panels are prone to cracking. As an expert woodworking rubber manufacturer, Jincheng adhesive, that has 16 many years of experience in woodworking silicone production and development, is popularised for all. The key reason why the wood needs to be released after drying is:
The standard treatment method of the solid wood after drying out of the kiln needs to be retained in the dry material health warehouse for a certain period of time , mainly because the moisture in the wood changes due to volatilization during the drying process, which easily triggers the type and volume of the wood. All of the alterations that occur cause internal stresses within the wood.
Before using the jigsaw stuff for wood slabs, the solid wood is aged for at least 1 month.
Therefore, before using
Wood Glue panels, the solid wood must be aged for a certain period of time . Regarding to our past experience, the wood release time highly recommended to be at least 30 days and nights ( depending on the ambient dampness, ambient temperature, sheet material, and so forth .) Decision) can play a role in reducing the stress in the wood.
Of course, wood using wood glue energy must strictly control its last moisture content. It is generally recommended that the moisture content be between 8- 15%. At the same time , it must be ensured that the wood moisture content deviation of the whole kiln is maintained to the minimum range. The plate will not crack.
